Tax included. Shipping calculated at checkout.
Pengambilan di toko tidak tersedia
Note: Harga Belum Termasuk PPN 11%
LC1D atau seri Tesys D adalah or optimum Schneider yang memiliki kontak bantu 1NO dan 1NC yang included di ornya. Perhatikan bahwa rating ampere yang tertulis di judul adalah rating arus untuk tipe motor AC3. Tipe Motor AC1 adalah motor yang tidak memiliki inrush current yang tinggi contoh aplikasi heater, lighting AC3 adalah motor yang memiliki inrush current contoh motor untuk pendingin, lift, penggerak. Jadi misalnya dengan or LC1D09 memiliki spek 9A untuk tipe motor AC3. Namun unutk tipe motor AC1 or ini mampu memiliki rating arus 25A.
Kontaktor LC1K09008M7 adalah pilihan yang handal dan tahan lama untuk aplikasi kontrol standar di mana arus nominal maksimum yang dikendalikan adalah 20A dan sirkuit kontrol menggunakan tegangan AC 220V.
| Range | TeSys |
| Product or component type | Contactor |
| Device application | Control |
| Contactor application |
Resistive load
|
| Utilisation category | AC-1 |
| Poles description | 4P |
| power pole contact composition | 2 NO + 2 NC |
| [Ue] rated operational voltage |
Power circuit: <= 690 V AC <= 400 Hz
Signalling circuit: <= 690 V AC <= 400 Hz |
| [Ie] rated operational current |
20 A (at <60 °C) at <= 690 V AC AC-1 for power circuit
|
| Control circuit type |
AC at 50/60 Hz
|
| [Uc] control circuit voltage |
220...230 V AC 50/60 Hz
|
| [Uimp] rated impulse withstand voltage | 8 kV |
| Overvoltage category | III |
| [Ith] conventional free air thermal current |
20 A (at 60 °C) for power circuit
10 A (at 50 °C) for signalling circuit |
| Irms rated making capacity |
110 A AC for power circuit conforming to IEC 60947
|
| Rated breaking capacity |
110 A at 220...230 V conforming to IEC 60947
110 A at 380...400 V conforming to IEC 60947 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 |
| [Icw] rated short-time withstand current |
90 A 50 °C - 1 s for power circuit
85 A 50 °C - 5 s for power circuit 80 A 50 °C - 10 s for power circuit 60 A 50 °C - 30 s for power circuit 45 A 50 °C - 1 min for power circuit 40 A 50 °C - 3 min for power circuit 20 A 50 °C - >= 15 min for power circuit |
| Associated fuse rating |
25 A gG at <= 440 V for power circuit
25 A aM for power circuit |
| Average impedance |
3 mOhm - Ith 20 A 50 Hz for power circuit
|
| [Ui] rated insulation voltage |
Power circuit: 600 V conforming to UL 508
Power circuit: 690 V conforming to IEC 60947-4-1 Power circuit: 600 V conforming to CSA C22.2 No 14 |
| Inrush power in VA |
30 VA (at 20 °C)
|
| Hold-in power consumption in VA |
4.5 VA (at 20 °C)
|
| Heat dissipation | 1.3 W |
| Control circuit voltage limits |
Operational: 0.8...1.15 Uc (at <50 °C)
Drop-out: >= 0.20 Uc (at <50 °C) |
| Connections - terminals |
Screw clamp terminals 1 cable(s) 1.5…4 mm²solid
Screw clamp terminals 1 cable(s) 0.75…4 mm²flexible without cable end Screw clamp terminals 1 cable(s) 0.34…2.5 mm²flexible with cable end Screw clamp terminals 2 cable(s) 1.5…4 mm²solid Screw clamp terminals 2 cable(s) 0.75…4 mm²flexible without cable end Screw clamp terminals 2 cable(s) 0.34…1.5 mm²flexible with cable end |
| Maximum operating rate | 3600 cyc/h |
| Signalling circuit frequency | <= 400 Hz |
| Mounting support | Plate Rail |
| Tightening torque |
0.8…1.3 N.m - on screw clamp terminals Philips No 2
0.8…1.3 N.m - on screw clamp terminals flat Ø 6 mm 0.8…1.3 N.m - on screw clamp terminals pozidriv No 2 |
| Operating time |
10...20 ms coil de-energisation and NO opening
10...20 ms coil energisation and NO closing 15...25 ms coil de-energisation and NC closing 5...15 ms coil energisation and NC opening |
| Safety reliability level |
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Mechanical durability | 10 Mcycles |
| Electrical durability |
0.16 Mcycles 20 A AC-1 at Ue <= 690 V
|
| Mechanical robustness |
Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 |
| Height | 58 mm |
| Width | 45 mm |
| Depth | 57 mm |
| Standards |
EN/IEC 60947-4-1
GB/T 14048.4 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1 IEC 60335-1:Clause 30.2 IEC 60335-2-40:Annex JJ UL 60335-2-40:Annex JJ |
| Product certifications | CB Scheme CCC UL CSA EAC CE UKCA |
| IP degree of protection |
IP2X conforming to VDE 0106
|
| Protective treatment |
TC conforming to IEC 60068
TC conforming to DIN 50016 |
| Ambient air temperature for storage | -50…80 °C |
| Operating altitude |
2000 m without derating
|
| Flame retardance |
V1 conforming to UL 94
Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.500 cm |
| Package 1 Width | 6.200 cm |
| Package 1 Length | 4.800 cm |
| Package 1 Weight | 177.000 g |
| Vendor | AMS Network |
|---|---|
| Type | electricity |
| Sku | 5 |
| Weight | 0.5 kg |
